The USB Power Delivery Fast Role Swap switches provide a tool to simulate a loss of external power. They are currently available to use for correlation, validation and debugging of USB Fast Role Swap architecture. Please note these are not to be used for USB-IF certification purposes at this time.
This tool is used to test the Logical Layer, Protocol Layer, and Tunneling functionality of a USB4 Router. This tool takes control over the USB4 Connection Manager and renders all products connected to it unusable. USB4CV should not be installed on an oscilloscope or any system that uses USB as its only form of input from the user.
Samsung Tool 11.4.zip
USB3CV is used to test USB 2.0 devices and USB 3.2 devices. This tool is used to test a USB product's control messaging, descriptors and basic protocol when connected to an xHCI controller. This tool takes control over the USB host controller and renders all products connected to it unusable. USB3CV should not be installed on an oscilloscope or any system that uses USB as its only form of input from the user.
NOTE 1: In order to use USB3CV, User Account Control (UAC) must be turned off. After turning off UAC, the system must be rebooted.NOTE 2: The USB3CV tool is supported on Windows 7 and above.
This tool is used to test an xHCI controller for compliance to the xHCI Specification. This tool takes control over the USB host controller and renders all products connected to it unusable. Testing requires use of compliance devices, a device that supports LPM-L1, and samples of all speeds of devices supported by the xHCI controller being tested.
NOTE 1: In order to use DualHostUSB3CV, User Account Control (UAC) must be turned off. After turning off UAC, the system must be rebooted.NOTE 2 : The DualHostUSB3CV tool is supported on Windows 7 and above only.
This tool kit contains the Window-based HSETT utility used to initiate test modes through an xHCI controller. xHSETT also enables electrical testing for Enhanced SuperSpeed products. Detailed test procedures for high-speed host, hub and device electrical testing, tailored to common test equipment, can be downloaded here.
NOTE 1: In order to use USBHSET, User Account Control (UAC) must be turned off. After turning off UAC, the system must be rebooted.NOTE 2: The USBHSET tool works on Windows 7 and above only. Email admin@usb.org if you would like an old version of the tool that supports XP.
USB20CV is the compliance test tool which evaluates High, Full and Low-speed USB devices for conformance to the USB Device Framework (Chapter 9), Hub device class (Chapter 11), HID class, and OTG specifications. Also included are mass storage class and USB video class specification tests. All USB peripherals and hubs are required to pass the Device Framework tests in order to gain certification. The other tests are mandatory for certification when supported. This tool takes control over the USB host controller and renders all products connected to it unusable. USB2CV should not be installed an oscilloscope or any system that uses USB as its only form of input from the user.
This tool kit contains the Window-based HSETT utility used to initiate test modes on an EHCI host controller. Detailed test procedures for high-speed host, hub and device electrical testing, tailored to common test equipment, can be downloaded here. A USB Electrical Analysis Tool is available separately for download (see USBET below). The procedures for legacy testing can be found in the USB-IF Compliance Program area. This software provided courtesy of Intel Corporation.
SigTest is the official tool for USB transmitter voltage, LFPS, and Signal Quality electrical compliance testing as well as for calibrating SuperSpeed receiver test solutions. SigTest is designed to be used with the electrical test fixture available in the USB-IF eStore.
USBET20 is a stand-alone electrical signal analysis tool for USB Compliance testing. USBET20 is the official compliance electrical analysis tool that performs pass/fail assessments on signal quality and inrush current data captured from an oscilloscope.
NOTE 1: The only official analysis tool for certifying signal quality and inrush current is USBET20 published by the USB-IF. Some of the approved oscilloscope test solutions use proprietary software to assess signal quality and inrush current events. Please be sure to run captured signal quality and inrush current test data through USBET20 for an official assessment of the measurement.NOTE 2: The USBHSET tool works on Windows 7 and above only.
The HSEHET board is a tool for initiating test modes on high-speed, downstream ports of embedded hosts. The HSEHET board provides the ability to select which VID/PID (i.e. test mode) to expose to the embedded host. The VID/PID definitions are defined in the "Embedded High-speed Host Electrical Test Procedure."
SuperMUTT The Microsoft SuperMUTT operates as a Full Speed, High Speed, and SuperSpeed compliance device. XHCICV and USB3CV can programmatically change the SuperMUTT to operate at the desired speed. We recommend using the SuperMUTT instead of the older compliance devices. Use SuperMUTT firmware version 57 or later. The firmware updating utility can be downloaded here or directly from Microsoft. Additional info can be found here: -us/windows-hardware/drivers/usbcon/muttutil. Ordering instructions are found here: -us/windows-hardware/drivers/usbcon/microsoft-usb-test-tool--mutt--devices. Contact usbcompliance@usb.org with any questions.
However, the problem arises when you forget the Google account credentials. Well, worry no more as the best easy Samsung FRP bypass tool is right under your fingertips with the name - 4uKey for Android that makes the Samsung FRP unlocking much easier than you think. And it's free to download! Let's take a look!
FRP, aka Factory Reset Protection, is a security feature that will be enabled after you factory reset your Android device including Samsung phone with OS 5.1 or higher. When it's enabled, you have to enter your Google account credentials to access your device again. The FRP lock is an effective method to ensure data secure, however, things like being stuck on Google verification page often happen due to a forgotten password, in this case, 4uKey for Android, an easy Samsung FRP unlock tool comes into play. It helps bypass Samsung FRP with just a few clicks when you forget the Google account password on your Samsung devices. Supporting FRP byapss on Samsung devices with Android 6 to 12, 4uKey for Android now can be downloaded on your Windows PC and Mac free.
When the Samsung FRP bypass tool for PC free download process is done, it's time to see how this tool works on device running on Android 6 to 12. The process and steps involved in launching this Samsung FRP unlock tool are very easy to follow. Here is a step-by-step guide on how to bypass Samsung FRP with 4uKey for Android.
That's all for today's introduction to the Samsung FRP bypass tool for Mac and PC. In the end, you must make a proper, well-researched choice, when it comes to re-accessing your device. So, product like 4uKey for Android is a very good choice to bypass Google account verification after factory reset Samsung divices.
Rather than having to move back and forth between every single object on the system, the objects are organized hierarchically.This means that some objects contain other objects and you must move inside them to access the objects they contain.For example, a list contains list items, so you must move inside the list in order to access its items.If you have moved to a list item, moving next and previous will take you to other list items in the same list.Moving to a list item's containing object will take you back to the list.You can then move past the list if you wish to access other objects.Similarly, a toolbar contains controls, so you must move inside the toolbar to access the controls in the toolbar.
When authors don't provide sufficient information for a screen reader user to determine the content of something, various tools can be used to attempt to recognize the content from an image.NVDA supports the optical character recognition (OCR) functionality built into Windows 10 and later to recognize text from images.Additional content recognizers can be provided in NVDA add-ons.
A checkbox that when checked tells NVDA to report tooltips as they appear.Many Windows and controls show a small message (or tooltip) when you move the mouse pointer over them, or sometimes when you move the focus to them.
Physical braille displays typically have buttons to scroll forwards or backwards, to enable scrolling with the braille viewer tool use the Input Gestures dialog to assign keyboard shortcuts which "Scrolls the braille display back" and "Scrolls the braille display forward"
The NVDA Python console, found under Tools in the NVDA menu, is a development tool which is useful for debugging, general inspection of NVDA internals or inspection of the accessibility hierarchy of an application.For more information, please see the NVDA Developer Guide.
This will open a dialog which allows you to create a portable copy of NVDA out of the installed version.Either way, when running a portable copy of NVDA, in the extra tool sub menu the menu item will be called "install NVDA on this PC" instead of "create portable copy). 2ff7e9595c
Comments